Product ID:F BLUE
MSDS Date:06/21/1990
FSC:8010
NIIN:00N063508
MSDS Number: BZBMR

Emergency Phone: 201-345-6206

Info Phone: 201-345-6206

Cage: 51133

Telephone: 201-345-6206

Cage: 51133

MINERAL OIL; (OIL MIST)

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: <65%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3 (MIST)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IF OVERHEATED, VAPORS OF
MINERAL OIL WILL BE GENERATED, THESE MAY RESULT IN EYE TEARING,
COUGHING AND RESPIRATORY DISTRESS. CHRONIC: USE TEMPERATURE OF 350F
CAN CAUSE SERIOUS THERMAL BURNS TO E XPOSED TISSUES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INHALATION: REMOVE TO FRESH AIR. VENTILATE ENCLOSED SPACE.
EYES: FUMES, FLUSH WITH WATER FOR AT LEAST 15 MINUTES, MOLTEN
MATERIAL. CALL MD IMMEDIATELY. SKIN: MOLTEN MATERIAL. TREAT AS FOR
THERMAL BURN S. INGESTION: CALL MD IMMEDIATELY .

Flash Point Method:COC
Flash Point:415F,213C
Extinguishing Media:USE CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:HANDLE AS BURNING OIR OR WAX. WEAR NIOSH/MSHA
APPROVED SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:ALLOW SPILLED MOLTEN MATERIAL TO SOLIDIFY.
SCRAPE UP AND RETURN TO PROCESS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT HEAT MATERIAL OVER 380F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE ADEQUATE VENTILATION TO KEEP OIL MIST OF MATERIAL BELOW
APPLICABLE STANDARDS.
Protective Gloves:INSULATED HOT MILL GLOVES OR EQUAL.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID RESIN, WITH MINERAL OIL SMELL

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOXIC PRODUCTS OF COMBUSTION.

Waste Disposal Methods:INCINERATION OR LANDFILL IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.